INOX For Complete Polymerisation of Composites Cerkamed Poland

Gel promoting complete polymerisation of dental composites
COMPOSITION:
propanetriol (glycerol), Ph. Eur. purified water, gel base.

INTENDED USE
INOX Gel is intended for use during:
– polymerisation process of light-hardened composites;
– prosthetic treatments performed with the use of dental cement (e.g. placing veneers, inlays, onlays), in order to promote complete polymerisation of composites.
INOX Gel protects the surface of composites by blocking the access of oxygen during the light-curing process. This prevents the formation of an oxygen inhibition layer on the composite surface, so that the polymerisation process is not inhibited and can develop properly.
The composite surface hardened with INOX Gel is smooth, harder, more scratch- and abrasion-resistant. The composite is also non-sticky, resistant to discolouration and does not wash out.
The light of a polymerisation lamp penetrates through the gel layer. The product is easily washed out with water.
CAUTION: When using a composite material, follow the manufacturer’s recommendations.
INOX can also be used as a try-in gel for cementing of prosthetic works.

Polymerisation of light-cured composites:
1. Apply and form the last composite coat, apply INOX Gel without touching the composite coat with the applicator. The gel layer must tightly cover the whole surface of the dental restoration and stay in place during the polymerisation process.
2. Light cure through the gel coat
3. Wash out INOX Gel after the polymerisation process has been finished
4. Trim and polish the composite surface as needed.

During seating of prosthetic works with resin cement:
1. When the restoration has been seated, remove excess resin cement as needed.
2. Apply the INOX Gel on the marginal area of the restoration (veneer, inlay, onlay) without touching the composite coat with the applicator. The gel layer must tightly cover the whole surface of the dental restoration and stay in place during the polymerisation process.
3. Light cure through the gel coat
4. Wash out INOX Gel after the polymerisation process has been finished
5. Trim and polish the composite surface as needed.

CONTRAINDICATIONS
Do not use INOX in patients sensitive to any of the ingredients.

PRECAUTIONS
Use a rubber dam, gloves, safety goggles and protective clothing when working with the product. In case of eye contact, rinse with plenty of water.

STORAGE
Store in a tightly closed original container below 25°C.
Keep out of reach of children.
The expiry date is on the direct packaging.
After opening of the packaging the expiry date does not change, providing that the container is tightly closed after each use.

TRANSPORT
The product can be shipped for a maximum of 10 days under 40°C. Short distance shipping and handling within the recommended temperature range does not affect the safety of use and efficacy of the product before its expiry date.

HANDLING THE PRODUCT CONTAINER
Empty containers should be disposed of responsibly or returned to the manufacturer.

PACKAGING
A syringe containing 2 ml of the formulation.
BEFORE USE PLEASE READ THE ATTACHED INSTRUCTIONS CAREFULLY
TO BE USED BY DENTIST ONLY